DRI-MOLY Directions for Use
Shake well before using. Clean surface thoroughly. Hold can 6 to 8 inches from surface and apply even, thin coats. Allow 1 to 5 minutes for adequate drying. The concentration…
read moreShake well before using. Clean surface thoroughly. Hold can 6 to 8 inches from surface and apply even, thin coats. Allow 1 to 5 minutes for adequate drying. The concentration…
read moreDIRECTIONS FOR USE Shake well before using. Remove protective cap. Hold can 6 to 8 inches from surfaces to be sprayed. Apply an even coat to surface. Turn on machinery and…
read moreDIRECTIONS FOR USE: When used through high pressure equipment with direct chemical injections, FLEET KLEEN can be metered directly from its container at a ratio of 1:50 for most applications when…
read moreDip, pump or scoop a small amount from the 4½ lb. container or squeeze a small amount from 15 oz. tube and place in palm of your hand. Rub hands…
read moreUse 1 to 3 ounces of GREEN FURY to one gallon cold or warm water, depending on soil. Apply solution to pre-rinsed equipment – allow to set approximately 5 minutes. Swab heavily…
read more